OpenARM Single-board Computer - /

Rev 265 -- adding some not used capacitor component information to the archive

jelle — Thu, 13 Nov 2008 09:33:02 +0100

jelle -- 2 file(s) modified
adding some not used capacitor component information to the archive

+ /trunk/archive/GRM32ER61A106KA01L
+ /trunk/archive/GRM32ER61A106KA01L/information.txt

Rev 264 -- adding bill of materials information for schematic 03-jtag.sch and updating ...

jelle — Thu, 13 Nov 2008 09:32:06 +0100

jelle -- 2 file(s) modified
adding bill of materials information for schematic 03-jtag.sch and updating the symbols

~ /trunk/working/gschem/openarm-sbc.bom
~ /trunk/working/gschem/sch/03-jtag.sch

Rev 263 -- updating component information used in 03-jtag.sch

jelle — Thu, 13 Nov 2008 09:31:04 +0100

jelle -- 3 file(s) modified
updating component information used in 03-jtag.sch

~ /trunk/doc/CAPACITORS/GRM21BR71H104KA01L/information.txt
~ /trunk/doc/CONNECTORS/2-1634688-0/information.txt
~ /trunk/doc/CPU/LPC3180FEL320/information.txt

Rev 262 -- updating symbols with new footprint and device information

jelle — Wed, 12 Nov 2008 14:47:17 +0100

jelle -- 2 file(s) modified
updating symbols with new footprint and device information

~ /trunk/working/gschem/sch/01-power-supply.sch
~ /trunk/working/gschem/sch/02-power-on-reset.sch

Rev 261 -- adding bill of materials information for 02-power-on-reset.sch

jelle — Wed, 12 Nov 2008 14:46:15 +0100

jelle -- 1 file(s) modified
adding bill of materials information for 02-power-on-reset.sch

~ /trunk/working/gschem/openarm-sbc.bom

Rev 260 -- adding and updating component information used for 02-power-on-reset.sch

jelle — Wed, 12 Nov 2008 14:45:06 +0100

jelle -- 14 file(s) modified
adding and updating component information used for 02-power-on-reset.sch

~ /trunk/doc/CONNECTORS/20.501M/information.txt
~ /trunk/doc/CONNECTORS/M20-9990246/information.txt
~ /trunk/doc/LOGIC/SN74LVC1G08DBVRG4/information.txt
~ /trunk/doc/LOGIC/SN74LVC2G07DBVR/information.txt
~ /trunk/doc/POWER/MCP120T-300I/information.txt
~ /trunk/doc/POWER/MCP120T-315I/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 4K7
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 4K7/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 10K
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 10K/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 100R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 100R/information.txt
~ /trunk/doc/SWITCH/B3S-1000/information.txt
x /trunk/doc/TERMINAL BLOCK

Rev 259 -- updating bom with component information out of 01-power-supply.sch, this needs ...

jelle — Wed, 12 Nov 2008 11:51:28 +0100

jelle -- 1 file(s) modified
updating bom with component information out of 01-power-supply.sch, this needs to be automated

~ /trunk/working/gschem/openarm-sbc.bom

Rev 258 -- updating symbols with the real component information

jelle — Wed, 12 Nov 2008 11:50:25 +0100

jelle -- 1 file(s) modified
updating symbols with the real component information

~ /trunk/working/gschem/sch/01-power-supply.sch

Rev 257 -- updating documentation for the power regulators used in sheet 01-power-supply.sch

jelle — Wed, 12 Nov 2008 11:49:05 +0100

jelle -- 2 file(s) modified
updating documentation for the power regulators used in sheet 01-power-supply.sch

~ /trunk/doc/POWER/LD1117S12TR/information.txt
~ /trunk/doc/POWER/LD1117STR/information.txt

Rev 256 -- adding documentation for the capacitors used in sheet 01-power-supply.sch

jelle — Wed, 12 Nov 2008 11:48:07 +0100

jelle -- 4 file(s) modified
adding documentation for the capacitors used in sheet 01-power-supply.sch

+ /trunk/doc/CAPACITORS/GRM21BR71H104KA01L
+ /trunk/doc/CAPACITORS/GRM21BR71H104KA01L/information.txt
+ /trunk/doc/CAPACITORS/GRM32NF51E106ZA01L
+ /trunk/doc/CAPACITORS/GRM32NF51E106ZA01L/information.txt

Rev 255 -- adding documentation for the resistors used in sheet 01-power-supply.sch

jelle — Wed, 12 Nov 2008 11:47:02 +0100

jelle -- 11 file(s) modified
adding documentation for the resistors used in sheet 01-power-supply.sch

+ /trunk/doc/RESISTORS
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 120R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 120R/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 220R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 220R/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 240R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 240R/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 330R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 330R/information.txt
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 390R
+ /trunk/doc/RESISTORS/MC 0.1W 0805 1% 390R/information.txt

Rev 254 -- update the readme, with updated project structure description

jelle — Wed, 12 Nov 2008 10:50:56 +0100

jelle -- 1 file(s) modified
update the readme, with updated project structure description

~ /trunk/README

Rev 253 -- fixed bug in create-pdf.sh and added combined pdf of all ...

jelle — Tue, 11 Nov 2008 12:47:43 +0100

jelle -- 18 file(s) modified
fixed bug in create-pdf.sh and added combined pdf of all schematics

~ /trunk/working/gschem/pdf/01-power-supply.pdf
~ /trunk/working/gschem/pdf/02-power-on-reset.pdf
~ /trunk/working/gschem/pdf/03-jtag.pdf
~ /trunk/working/gschem/pdf/04-sdram.pdf
~ /trunk/working/gschem/pdf/05-flash.pdf
~ /trunk/working/gschem/pdf/06-micro-sd.pdf
~ /trunk/working/gschem/pdf/07-ethernet.pdf
~ /trunk/working/gschem/pdf/08-rs232.pdf
~ /trunk/working/gschem/pdf/09-oscillators.pdf
~ /trunk/working/gschem/pdf/10-usb.pdf
~ /trunk/working/gschem/pdf/11-connectors.pdf
~ /trunk/working/gschem/pdf/12-lpc3180-power.pdf
~ /trunk/working/gschem/pdf/13-can.pdf
~ /trunk/working/gschem/pdf/14-spi.pdf
+ /trunk/working/gschem/pdf/combined
+ /trunk/working/gschem/pdf/combined/combined.pdf
~ /trunk/working/gschem/pdf/create-pdf.sh
~ /trunk/working/gschem/pdf/print.scm

Rev 252 -- adding pdf documents generation system for the sch files, this ...

jelle — Sun, 02 Nov 2008 23:11:18 +0100

jelle -- 17 file(s) modified
adding pdf documents generation system for the sch files, this is a ugly way of creating pdf files better systems should be created...

+ /trunk/working/gschem/pdf/01-power-supply.pdf
+ /trunk/working/gschem/pdf/02-power-on-reset.pdf
+ /trunk/working/gschem/pdf/03-jtag.pdf
+ /trunk/working/gschem/pdf/04-sdram.pdf
+ /trunk/working/gschem/pdf/05-flash.pdf
+ /trunk/working/gschem/pdf/06-micro-sd.pdf
+ /trunk/working/gschem/pdf/07-ethernet.pdf
+ /trunk/working/gschem/pdf/08-rs232.pdf
+ /trunk/working/gschem/pdf/09-oscillators.pdf
+ /trunk/working/gschem/pdf/10-usb.pdf
+ /trunk/working/gschem/pdf/11-connectors.pdf
+ /trunk/working/gschem/pdf/12-lpc3180-power.pdf
+ /trunk/working/gschem/pdf/13-can.pdf
+ /trunk/working/gschem/pdf/14-spi.pdf
+ /trunk/working/gschem/pdf/create-pdf.sh
+ /trunk/working/gschem/pdf/print.scm
x /trunk/working/gschem/pdf/TODO.txt

Rev 251 -- initial version of the bill of materials

jelle — Sun, 02 Nov 2008 22:06:52 +0100

jelle -- 1 file(s) modified
initial version of the bill of materials

+ /trunk/working/gschem/openarm-sbc.bom

Rev 250 -- adding some device info for some components

jelle — Sun, 02 Nov 2008 22:06:04 +0100

jelle -- 1 file(s) modified
adding some device info for some components

~ /trunk/working/gschem/sch/01-power-supply.sch

Rev 249 -- adding documentation for HEADER, 1ROW, 2WAY

jelle — Sun, 02 Nov 2008 22:04:46 +0100

jelle -- 2 file(s) modified
adding documentation for HEADER, 1ROW, 2WAY

+ /trunk/doc/CONNECTORS/M20-9990246
+ /trunk/doc/CONNECTORS/M20-9990246/information.txt

Rev 248 -- updating documentation for DIODE, SCHOTTKY, 3A, 40V

jelle — Sun, 02 Nov 2008 22:03:59 +0100

jelle -- 1 file(s) modified
updating documentation for DIODE, SCHOTTKY, 3A, 40V

~ /trunk/doc/DIODE/STPS340U/information.txt

Rev 247 -- adding documentation for CAPACITOR, CASE G, 470UF, 25V

jelle — Sun, 02 Nov 2008 22:02:55 +0100

jelle -- 3 file(s) modified
adding documentation for CAPACITOR, CASE G, 470UF, 25V

+ /trunk/doc/CAPACITORS
+ /trunk/doc/CAPACITORS/EEEFK1E471P
+ /trunk/doc/CAPACITORS/EEEFK1E471P/information.txt

Rev 246 -- request for geschem conversion systems so the schematics can be ...

jelle — Fri, 31 Oct 2008 14:05:38 +0100

jelle -- 2 file(s) modified
request for geschem conversion systems so the schematics can be printed and spreat out in diffrent formats

+ /trunk/working/gschem/pdf
+ /trunk/working/gschem/pdf/TODO.txt

Rev 245 -- updating the planning.txt

jelle — Thu, 30 Oct 2008 15:12:01 +0100

jelle -- 1 file(s) modified
updating the planning.txt

~ /trunk/PLANNING

Rev 244 -- updating notes.txt, adding 14-spi.drc check, renaming main project schematic openarm-sbc.sch, ...

jelle — Thu, 30 Oct 2008 15:08:44 +0100

jelle -- 6 file(s) modified
updating notes.txt, adding 14-spi.drc check, renaming main project schematic openarm-sbc.sch, and accidentally broke the makefile

+ /trunk/working/gschem/drc/14-spi.drc
~ /trunk/working/gschem/Makefile
x /trunk/working/gschem/openarm-project.prj
+ /trunk/working/gschem/openarm-sbc.prj (copied from /trunk/working/gschem/openarm-project.prj@236)
+ /trunk/working/gschem/openarm-sbc.sch
~ /trunk/working/notes.txt

Rev 243 -- numbering and updating drc files

jelle — Thu, 30 Oct 2008 15:05:24 +0100

jelle -- 26 file(s) modified
numbering and updating drc files

+ /trunk/working/gschem/drc/01-power-supply.drc (copied from /trunk/working/gschem/drc/power-supply.drc@236)
+ /trunk/working/gschem/drc/02-power-on-reset.drc (copied from /trunk/working/gschem/drc/power-on-reset.drc@236)
+ /trunk/working/gschem/drc/03-jtag.drc (copied from /trunk/working/gschem/drc/jtag.drc@236)
+ /trunk/working/gschem/drc/04-sdram.drc (copied from /trunk/working/gschem/drc/sdram.drc@236)
+ /trunk/working/gschem/drc/05-flash.drc (copied from /trunk/working/gschem/drc/flash.drc@236)
+ /trunk/working/gschem/drc/06-micro-sd.drc (copied from /trunk/working/gschem/drc/micro-sd.drc@236)
+ /trunk/working/gschem/drc/07-ethernet.drc (copied from /trunk/working/gschem/drc/ethernet.drc@236)
+ /trunk/working/gschem/drc/08-rs232.drc (copied from /trunk/working/gschem/drc/rs232.drc@236)
+ /trunk/working/gschem/drc/09-oscillators.drc (copied from /trunk/working/gschem/drc/oscillators.drc@236)
+ /trunk/working/gschem/drc/10-usb.drc (copied from /trunk/working/gschem/drc/usb.drc@236)
+ /trunk/working/gschem/drc/11-connectors.drc (copied from /trunk/working/gschem/drc/connectors.drc@236)
+ /trunk/working/gschem/drc/12-lpc3180-power.drc (copied from /trunk/working/gschem/drc/lpc3180-power.drc@236)
+ /trunk/working/gschem/drc/13-can.drc (copied from /trunk/working/gschem/drc/can.drc@236)
x /trunk/working/gschem/drc/can.drc
x /trunk/working/gschem/drc/connectors.drc
x /trunk/working/gschem/drc/ethernet.drc
x /trunk/working/gschem/drc/flash.drc
x /trunk/working/gschem/drc/jtag.drc
x /trunk/working/gschem/drc/lpc3180-power.drc
x /trunk/working/gschem/drc/micro-sd.drc
x /trunk/working/gschem/drc/oscillators.drc
x /trunk/working/gschem/drc/power-on-reset.drc
x /trunk/working/gschem/drc/power-supply.drc
x /trunk/working/gschem/drc/rs232.drc
x /trunk/working/gschem/drc/sdram.drc
x /trunk/working/gschem/drc/usb.drc

Rev 242 -- renaming some pcb files

jelle — Thu, 30 Oct 2008 15:04:21 +0100

jelle -- 6 file(s) modified
renaming some pcb files

x /trunk/working/pcb/openarm-board.cmd
x /trunk/working/pcb/openarm-board.net
x /trunk/working/pcb/openarm-board.pcb
+ /trunk/working/pcb/openarm-sbc.cmd (copied from /trunk/working/pcb/openarm-board.cmd@236)
+ /trunk/working/pcb/openarm-sbc.net (copied from /trunk/working/pcb/openarm-board.net@236)
+ /trunk/working/pcb/openarm-sbc.pcb (copied from /trunk/working/pcb/openarm-board.pcb@236)

Rev 241 -- create sch directory and move, rename and renumber all sub ...

jelle — Thu, 30 Oct 2008 14:14:57 +0100

jelle -- 30 file(s) modified
create sch directory and move, rename and renumber all sub schematics

x /trunk/working/gschem/can.sch
x /trunk/working/gschem/connectors.sch
x /trunk/working/gschem/ethernet.sch
x /trunk/working/gschem/flash.sch
x /trunk/working/gschem/jtag.sch
x /trunk/working/gschem/lpc3180-power.sch
~ /trunk/working/gschem/Makefile
x /trunk/working/gschem/micro-sd.sch
x /trunk/working/gschem/oscillators.sch
x /trunk/working/gschem/power-on-reset.sch
x /trunk/working/gschem/power-supply.sch
x /trunk/working/gschem/rs232.sch
+ /trunk/working/gschem/sch
+ /trunk/working/gschem/sch/01-power-supply.sch (copied from /trunk/working/gschem/power-supply.sch@236)
+ /trunk/working/gschem/sch/02-power-on-reset.sch (copied from /trunk/working/gschem/power-on-reset.sch@236)
+ /trunk/working/gschem/sch/03-jtag.sch (copied from /trunk/working/gschem/jtag.sch@236)
+ /trunk/working/gschem/sch/04-sdram.sch (copied from /trunk/working/gschem/sdram.sch@236)
+ /trunk/working/gschem/sch/05-flash.sch (copied from /trunk/working/gschem/flash.sch@236)
+ /trunk/working/gschem/sch/06-micro-sd.sch (copied from /trunk/working/gschem/micro-sd.sch@236)
+ /trunk/working/gschem/sch/07-ethernet.sch (copied from /trunk/working/gschem/ethernet.sch@236)
+ /trunk/working/gschem/sch/08-rs232.sch (copied from /trunk/working/gschem/rs232.sch@236)
+ /trunk/working/gschem/sch/09-oscillators.sch (copied from /trunk/working/gschem/oscillators.sch@236)
+ /trunk/working/gschem/sch/10-usb.sch (copied from /trunk/working/gschem/usb.sch@236)
+ /trunk/working/gschem/sch/11-connectors.sch (copied from /trunk/working/gschem/connectors.sch@238)
+ /trunk/working/gschem/sch/12-lpc3180-power.sch (copied from /trunk/working/gschem/lpc3180-power.sch@236)
+ /trunk/working/gschem/sch/13-can.sch (copied from /trunk/working/gschem/can.sch@236)
+ /trunk/working/gschem/sch/14-spi.sch (copied from /trunk/working/gschem/spi.sch@237)
x /trunk/working/gschem/sdram.sch
x /trunk/working/gschem/spi.sch
x /trunk/working/gschem/usb.sch

Rev 240 -- - example pintype markings

agaran — Wed, 29 Oct 2008 18:48:25 +0100

agaran -- 1 file(s) modified
- example pintype markings

~ /trunk/working/gschem/sym/resources/LPC3180/LPC3180-SPI.symdef

Rev 239 -- - should generate same syms for all output, but supports ...

agaran — Wed, 29 Oct 2008 18:48:05 +0100

agaran -- 1 file(s) modified
- should generate same syms for all output, but supports optional pintypes, see LPC3180-SPI.symdef as an example

~ /trunk/working/scripts/djboxsym-openarm.pl

Rev 238 -- adding extra connector and unconnected SPI IC signals chip select, ...

jelle — Wed, 29 Oct 2008 17:11:27 +0100

jelle -- 1 file(s) modified
adding extra connector and unconnected SPI IC signals chip select, reset, interrupt to the IO blocks of the ARM LPC3180, if somebody has a better idea to connect multiple nets to one IO please discuss it

~ /trunk/working/gschem/connectors.sch

Rev 237 -- adding initial spi schematic block, this is just a small ...

jelle — Wed, 29 Oct 2008 17:06:51 +0100

jelle -- 1 file(s) modified
adding initial spi schematic block, this is just a small schematic to fit into the project schematic style

+ /trunk/working/gschem/spi.sch

Rev 236 -- - ignore logs here too (they rather shouldn't be considered ...

agaran — Wed, 22 Oct 2008 23:00:23 +0200

agaran -- 1 file(s) modified
- ignore logs here too (they rather shouldn't be considered as things to commit ever)

~ /trunk/working/gschem

Rev 235 -- - fixed typo and added ignores in current dir (.posthook-stamp ...

agaran — Wed, 22 Oct 2008 22:57:32 +0200

agaran -- 2 file(s) modified
- fixed typo and added ignores in current dir (.posthook-stamp and gschem.log)

~ /trunk/working/gschem/sym
~ /trunk/working/gschem/sym/resources/MCP2515

Rev 234 -- - forgot to add ignores here

agaran — Wed, 22 Oct 2008 22:49:31 +0200

agaran -- 3 file(s) modified
- forgot to add ignores here

~ /trunk/working/gschem/sym/resources/IP4220CZ6
~ /trunk/working/gschem/sym/resources/LPC3180
~ /trunk/working/gschem/sym/resources/MT48LC16M16A2

Rev 233 -- - really delete that files

agaran — Wed, 22 Oct 2008 22:44:36 +0200

agaran -- 16 file(s) modified
- really delete that files

x /trunk/working/gschem/sym/resources/1-1634688-0/.posthook-stamp
x /trunk/working/gschem/sym/resources/2-1634688-0/.posthook-stamp
x /trunk/working/gschem/sym/resources/20.501M/.posthook-stamp
x /trunk/working/gschem/sym/resources/22-27-2031/.posthook-stamp
x /trunk/working/gschem/sym/resources/22-27-2041/.posthook-stamp
x /trunk/working/gschem/sym/resources/500901-0801/.posthook-stamp
x /trunk/working/gschem/sym/resources/6605759-1/.posthook-stamp
x /trunk/working/gschem/sym/resources/565790576/.posthook-stamp
x /trunk/working/gschem/sym/resources/ENC28J60/.posthook-stamp
x /trunk/working/gschem/sym/resources/HY27UF084G2M/.posthook-stamp
x /trunk/working/gschem/sym/resources/ISP1301BS/.posthook-stamp
x /trunk/working/gschem/sym/resources/MCP2515/.posthook-stamp
x /trunk/working/gschem/sym/resources/SN65HVD232D/.posthook-stamp
x /trunk/working/gschem/sym/resources/SN74LVC1G08/.posthook-stamp
x /trunk/working/gschem/sym/resources/SN74LVC2G07/.posthook-stamp
x /trunk/working/gschem/sym/resources/SN75C3232/.posthook-stamp

Rev 232 -- - added ignores for .posthook-stamp files, and removed that files

agaran — Wed, 22 Oct 2008 22:36:04 +0200

agaran -- 17 file(s) modified
- added ignores for .posthook-stamp files, and removed that files

~ /trunk/working/gschem/sym/resources
~ /trunk/working/gschem/sym/resources/1-1634688-0
~ /trunk/working/gschem/sym/resources/2-1634688-0
~ /trunk/working/gschem/sym/resources/20.501M
~ /trunk/working/gschem/sym/resources/22-27-2031
~ /trunk/working/gschem/sym/resources/22-27-2041
~ /trunk/working/gschem/sym/resources/500901-0801
~ /trunk/working/gschem/sym/resources/6605759-1
~ /trunk/working/gschem/sym/resources/565790576
~ /trunk/working/gschem/sym/resources/ENC28J60
~ /trunk/working/gschem/sym/resources/HY27UF084G2M
~ /trunk/working/gschem/sym/resources/ISP1301BS
~ /trunk/working/gschem/sym/resources/MCP2515
~ /trunk/working/gschem/sym/resources/SN65HVD232D
~ /trunk/working/gschem/sym/resources/SN74LVC1G08
~ /trunk/working/gschem/sym/resources/SN74LVC2G07
~ /trunk/working/gschem/sym/resources/SN75C3232

Rev 231 -- - some comments added, commented declaration of %x/%y because that ...

agaran — Wed, 22 Oct 2008 21:15:03 +0200

agaran -- 1 file(s) modified
- some comments added, commented declaration of %x/%y because that causes produced symbols differ from previous results

~ /trunk/working/scripts/djboxsym-openarm.pl

Rev 230 -- [footprint] -Add: proper license comments in the USB connector and ...

igor — Mon, 13 Oct 2008 19:24:16 +0200

igor -- 2 file(s) modified
[footprint] -Add: proper license comments in the USB connector and diode footprints

~ /trunk/working/pcb/footprints/565790576.fp
~ /trunk/working/pcb/footprints/stps340u.fp

Rev 229 -- [footprints] -Add: USB connector footprint

igor — Mon, 13 Oct 2008 19:14:45 +0200

igor -- 2 file(s) modified
[footprints] -Add: USB connector footprint

~ /trunk/PLANNING
+ /trunk/working/pcb/footprints/565790576.fp

Rev 228 -- [footprint] footprint for stps340u diode and some hints for other ...

igor — Mon, 13 Oct 2008 17:21:05 +0200

igor -- 2 file(s) modified
[footprint] footprint for stps340u diode and some hints for other footprints in PLANNING

~ /trunk/PLANNING
+ /trunk/working/pcb/footprints/stps340u.fp

Rev 227 -- -Update: PLANNING for ethernet

igor — Sun, 12 Oct 2008 18:51:33 +0200

igor -- 1 file(s) modified
-Update: PLANNING for ethernet

~ /trunk/PLANNING

Rev 226 -- [footprints] -Fix: added missing license infor in rj45 footprint

igor — Sun, 12 Oct 2008 18:50:23 +0200

igor -- 1 file(s) modified
[footprints] -Fix: added missing license infor in rj45 footprint

~ /trunk/working/pcb/footprints/6605759.fp