OpenARM Single-board Computer - /trunk/working/notes.txt

Rev 395 -- updating planning and some notes

jelle — Thu, 14 May 2009 12:09:03 +0200

jelle -- 3 file(s) modified
updating planning and some notes

~ /trunk/PLANNING
x /trunk/working/gschem/sym/resources/LPC3180/SOT824.fp
~ /trunk/working/notes.txt

Rev 364 -- adding and updating the project notes.txt files

jelle — Tue, 05 May 2009 17:17:37 +0200

jelle -- 3 file(s) modified
adding and updating the project notes.txt files

+ /trunk/working/books.txt
+ /trunk/working/notes-pcb.txt
~ /trunk/working/notes.txt

Rev 347 -- upding the credit file

jelle — Wed, 29 Apr 2009 17:45:32 +0200

jelle -- 30 file(s) modified
upding the credit file

~ /trunk/CREDIT
~ /trunk/working/gschem/drc/03-jtag.drc
~ /trunk/working/gschem/drc/04-sdram.drc
~ /trunk/working/gschem/drc/05-flash.drc
~ /trunk/working/gschem/drc/06-micro-sd.drc
~ /trunk/working/gschem/drc/08-rs232.drc
~ /trunk/working/gschem/drc/09-oscillators.drc
~ /trunk/working/gschem/drc/10-usb.drc
~ /trunk/working/gschem/drc/11-connectors.drc
~ /trunk/working/gschem/drc/12-lpc3180-power.drc
~ /trunk/working/gschem/drc/14-spi.drc
~ /trunk/working/gschem/pdf/01-power-supply.pdf
~ /trunk/working/gschem/pdf/02-power-on-reset.pdf
~ /trunk/working/gschem/pdf/03-jtag.pdf
~ /trunk/working/gschem/pdf/04-sdram.pdf
~ /trunk/working/gschem/pdf/05-flash.pdf
~ /trunk/working/gschem/pdf/06-micro-sd.pdf
~ /trunk/working/gschem/pdf/07-ethernet.pdf
~ /trunk/working/gschem/pdf/08-rs232.pdf
~ /trunk/working/gschem/pdf/09-oscillators.pdf
~ /trunk/working/gschem/pdf/10-usb.pdf
~ /trunk/working/gschem/pdf/11-connectors.pdf
~ /trunk/working/gschem/pdf/12-lpc3180-power.pdf
~ /trunk/working/gschem/pdf/13-can.pdf
~ /trunk/working/gschem/pdf/14-spi.pdf
~ /trunk/working/notes.txt
~ /trunk/working/pcb/openarm-sbc-footprints-simple.txt
~ /trunk/working/pcb/openarm-sbc.cmd
~ /trunk/working/pcb/openarm-sbc.net
~ /trunk/working/pcb/openarm-sbc.pcb

Rev 341 -- adding some documentation how to make the pdf files and ...

jelle — Wed, 22 Apr 2009 13:05:45 +0200

jelle -- 1 file(s) modified
adding some documentation how to make the pdf files and inventory bom

~ /trunk/working/notes.txt

Rev 336 -- adding the autogenerated bob result to the project, and created ...

jelle — Fri, 23 Jan 2009 13:38:17 +0100

jelle -- 3 file(s) modified
adding the autogenerated bob result to the project, and created an pdf of it for demonstration, also updated some the notes

+ /trunk/working/gschem/openarm-sbc-inventory.bom
+ /trunk/working/gschem/pdf/openarm-sbc-inventory.pdf
~ /trunk/working/notes.txt

Rev 309 -- updating some project notes

jelle — Tue, 25 Nov 2008 19:21:00 +0100

jelle -- 1 file(s) modified
updating some project notes

~ /trunk/working/notes.txt

Rev 244 -- updating notes.txt, adding 14-spi.drc check, renaming main project schematic openarm-sbc.sch, ...

jelle — Thu, 30 Oct 2008 15:08:44 +0100

jelle -- 6 file(s) modified
updating notes.txt, adding 14-spi.drc check, renaming main project schematic openarm-sbc.sch, and accidentally broke the makefile

+ /trunk/working/gschem/drc/14-spi.drc
~ /trunk/working/gschem/Makefile
x /trunk/working/gschem/openarm-project.prj
+ /trunk/working/gschem/openarm-sbc.prj (copied from /trunk/working/gschem/openarm-project.prj@236)
+ /trunk/working/gschem/openarm-sbc.sch
~ /trunk/working/notes.txt

Rev 220 -- updating the project notes and checking, prepairing inputs and outputs ...

jelle — Fri, 10 Oct 2008 18:18:08 +0200

jelle -- 1 file(s) modified
updating the project notes and checking, prepairing inputs and outputs of schematics to get interconnected

~ /trunk/working/notes.txt

Rev 212 -- adding initial can.sch schematic, still need to connect the SPI ...

jelle — Thu, 09 Oct 2008 19:37:13 +0200

jelle -- 3 file(s) modified
adding initial can.sch schematic, still need to connect the SPI interface to lpc3180 fuction block

+ /trunk/working/gschem/can.drc
+ /trunk/working/gschem/can.sch
~ /trunk/working/notes.txt

Rev 210 -- adding template.sch to the project and update some notes

jelle — Sun, 05 Oct 2008 18:22:32 +0200

jelle -- 2 file(s) modified
adding template.sch to the project and update some notes

+ /trunk/working/gschem/template.sch
~ /trunk/working/notes.txt

Rev 195 -- big commit changing the usb mini type-b 565790576 to usb ...

jelle — Thu, 02 Oct 2008 18:54:03 +0200

jelle -- 21 file(s) modified
big commit changing the usb mini type-b 565790576 to usb otg mini-type-ab 548190572 as indicated in the ISP1301 datasheet

+ /trunk/archive/548190572
+ /trunk/archive/548190572/73071.pdf
+ /trunk/archive/548190572/information.txt
+ /trunk/doc/USB/565790576
+ /trunk/doc/USB/565790576/73073.pdf
+ /trunk/doc/USB/565790576/information.txt
+ /trunk/working/gschem/sym/archive
+ /trunk/working/gschem/sym/archive/548190572
+ /trunk/working/gschem/sym/archive/548190572/548190572.sym
+ /trunk/working/gschem/sym/archive/548190572/548190572.symdef
+ /trunk/working/gschem/sym/archive/548190572/Makefile
~ /trunk/working/gschem/sym/Makefile
x /trunk/working/gschem/sym/resources/548190572
+ /trunk/working/gschem/sym/resources/565790576
+ /trunk/working/gschem/sym/resources/565790576/.posthook-stamp
+ /trunk/working/gschem/sym/resources/565790576/565790576.sym
+ /trunk/working/gschem/sym/resources/565790576/565790576.symdef
+ /trunk/working/gschem/sym/resources/565790576/Makefile
~ /trunk/working/gschem/usb.drc
~ /trunk/working/gschem/usb.sch
~ /trunk/working/notes.txt

Rev 188 -- adding initial usb.sch schematic

jelle — Thu, 02 Oct 2008 14:13:29 +0200

jelle -- 3 file(s) modified
adding initial usb.sch schematic

+ /trunk/working/gschem/usb.drc
+ /trunk/working/gschem/usb.sch
~ /trunk/working/notes.txt

Rev 182 -- adding initial oscillators.sch schematic

jelle — Tue, 30 Sep 2008 12:22:02 +0200

jelle -- 3 file(s) modified
adding initial oscillators.sch schematic

+ /trunk/working/gschem/oscillators.drc
+ /trunk/working/gschem/oscillators.sch
~ /trunk/working/notes.txt

Rev 179 -- updating project documentation

jelle — Thu, 11 Sep 2008 14:23:10 +0200

jelle -- 4 file(s) modified
updating project documentation

~ /trunk/doc/DSUB/8LCM009S-304B-XX/information.txt
~ /trunk/doc/RS232/SN75C3232PW/information.txt
~ /trunk/PLANNING
~ /trunk/working/notes.txt

Rev 173 -- updating PLANNING and adding some project notes

jelle — Wed, 10 Sep 2008 15:48:19 +0200

jelle -- 2 file(s) modified
updating PLANNING and adding some project notes

~ /trunk/PLANNING
~ /trunk/working/notes.txt

Rev 165 -- adding micro-sd openarm schematics to the project, footprint still need ...

jelle — Tue, 09 Sep 2008 19:19:18 +0200

jelle -- 3 file(s) modified
adding micro-sd openarm schematics to the project, footprint still need to be made...

+ /trunk/working/gschem/micro-sd.drc
+ /trunk/working/gschem/micro-sd.sch
~ /trunk/working/notes.txt

Rev 162 -- adding some project notes

jelle — Tue, 09 Sep 2008 15:58:29 +0200

jelle -- 1 file(s) modified
adding some project notes

~ /trunk/working/notes.txt

Rev 155 -- updating project files

jelle — Thu, 21 Aug 2008 13:23:10 +0200

jelle -- 3 file(s) modified
updating project files

~ /trunk/working/gschem/gafrc
~ /trunk/working/gschem/jtag.sch
~ /trunk/working/notes.txt

Rev 140 -- add some documentation notes about tragesym

jelle — Wed, 20 Aug 2008 16:19:49 +0200

jelle -- 1 file(s) modified
add some documentation notes about tragesym

~ /trunk/working/notes.txt

Rev 126 -- updating schematic project notes and files

jelle — Wed, 20 Aug 2008 11:14:56 +0200

jelle -- 3 file(s) modified
updating schematic project notes and files

~ /trunk/working/gschem/gafrc
~ /trunk/working/gschem/openarm-project.prj
~ /trunk/working/notes.txt

Rev 113 -- moving the NXP LPC3180 symbols to working directory

jelle — Thu, 14 Aug 2008 19:31:47 +0200

jelle -- 3 file(s) modified
moving the NXP LPC3180 symbols to working directory

~ /trunk/doc/POWER/calculations.txt
~ /trunk/working/notes.txt
x /trunk/working/pcb/lib/LPC3180

Rev 104 -- adding some project notes

jelle — Wed, 13 Aug 2008 22:46:12 +0200

jelle -- 1 file(s) modified
adding some project notes

~ /trunk/working/notes.txt

Rev 97 -- adding calculation for power-on reset circuit

jelle — Wed, 13 Aug 2008 14:34:27 +0200

jelle -- 7 file(s) modified
adding calculation for power-on reset circuit

+ /trunk/doc/CPU/LPC3180FEL320/LPC3180_2.pdf
~ /trunk/doc/JTAG/information.txt
~ /trunk/doc/POWER/LD1117STR/information.txt
~ /trunk/doc/POWER/MCP130T-315/information.txt
~ /trunk/working/gschem/power-supply.sch
~ /trunk/working/gschem/sym/terminal-3.sym
~ /trunk/working/notes.txt

Rev 96 -- fixing the broken power-supply schematics, with new net attributes

jelle — Tue, 12 Aug 2008 22:26:07 +0200

jelle -- 6 file(s) modified
fixing the broken power-supply schematics, with new net attributes

~ /trunk/working/gschem/gafrc
x /trunk/working/gschem/issue-vin-vout.png
~ /trunk/working/gschem/power-supply.sch
~ /trunk/working/notes.txt
~ /trunk/working/pcb/openarm-board.net
~ /trunk/working/pcb/openarm-board.pcb

Rev 95 -- adding some picture of issue

jelle — Tue, 12 Aug 2008 20:04:58 +0200

jelle -- 4 file(s) modified
adding some picture of issue

~ /trunk/working/gschem/gafrc
~ /trunk/working/gschem/gschem.log
+ /trunk/working/gschem/issue-vin-vout.png
~ /trunk/working/notes.txt

Rev 93 -- adding broken power-supply schematics

jelle — Tue, 12 Aug 2008 19:38:05 +0200

jelle -- 6 file(s) modified
adding broken power-supply schematics

~ /trunk/working/gschem/gschem.log
~ /trunk/working/gschem/openarm-project.prj
~ /trunk/working/notes.txt
~ /trunk/working/pcb/openarm-board.cmd
~ /trunk/working/pcb/openarm-board.net
~ /trunk/working/pcb/openarm-board.pcb

Rev 92 -- adding some testing schematics and symbols

jelle — Mon, 11 Aug 2008 17:29:56 +0200

jelle -- 95 file(s) modified
adding some testing schematics and symbols

x /trunk/pcb
+ /trunk/working
+ /trunk/working/gschem
+ /trunk/working/gschem/gafrc
+ /trunk/working/gschem/gschem.log
+ /trunk/working/gschem/jtag.sch
+ /trunk/working/gschem/openarm-project.prj
+ /trunk/working/gschem/powersupply.drc
+ /trunk/working/gschem/powersupply.sch
+ /trunk/working/gschem/sym
+ /trunk/working/gschem/sym/gschem.log
+ /trunk/working/gschem/sym/ld1117-1.sym
+ /trunk/working/gschem/sym/terminal-3.sym
+ /trunk/working/notes.txt
+ /trunk/working/pcb
+ /trunk/working/pcb/lib
+ /trunk/working/pcb/lib/64MSDRAM
+ /trunk/working/pcb/lib/64MSDRAM/64MSDRAM.sym
+ /trunk/working/pcb/lib/64MSDRAM/64MSDRAM.symdef
+ /trunk/working/pcb/lib/64MSDRAM/Makefile
+ /trunk/working/pcb/lib/64MSDRAM/TSOP_II_54.fp
+ /trunk/working/pcb/lib/djboxsym
+ /trunk/working/pcb/lib/LPC3180
+ /trunk/working/pcb/lib/LPC3180/LPC3180-AD.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-AD.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-FLASH.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-FLASH.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPI.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPI.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPIO.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPIO.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPO.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-GPO.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-I2C.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-I2C.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-JTAG.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-JTAG.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-KEY.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-KEY.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-MISC.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-MISC.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-MS.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-MS.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-PWM.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-PWM.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-RAM.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-RAM.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-RTCX.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-RTCX.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-SPI.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-SPI.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-SYS.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-SYS.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-U.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-U.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-USB.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-USB.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-12.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-12.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-AD28.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-AD28.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-CORE.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-CORE.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-IO.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-IO.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-misc.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-misc.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-PLL.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-PLL.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-RAM.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VDD-RAM.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-AD.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-AD.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-CORE.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-CORE.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-gen.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-gen.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-IO.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-IO.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-misc.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-misc.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-PLL.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-PLL.symdef
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-RAM.sym
+ /trunk/working/pcb/lib/LPC3180/LPC3180-VSS-RAM.symdef
+ /trunk/working/pcb/lib/LPC3180/Makefile
+ /trunk/working/pcb/lib/LPC3180/per_row
+ /trunk/working/pcb/lib/LPC3180/raw
+ /trunk/working/pcb/lib/LPC3180/Readme
+ /trunk/working/pcb/lib/LPC3180/renum.sh
+ /trunk/working/pcb/lib/LPC3180/row:col_groupped2
+ /trunk/working/pcb/lib/LPC3180/SOT824.fp
+ /trunk/working/pcb/openarm-board.cmd
+ /trunk/working/pcb/openarm-board.net
+ /trunk/working/pcb/openarm-board.pcb